BLUETTI EnergyPro 6K — 5760W 7680Wh Home Battery System

BLUETTI EnergyPro 6K — 5,760W / 7,680Wh Whole-Home Backup System

The BLUETTI EnergyPro 6K is a hybrid inverter and LiFePO4 battery system built for whole-home backup, solar self-consumption, and microgrid-style energy independence. With 5,760W of continuous AC output and 7,680Wh of storage, it transforms your home into a self-sustaining microgrid that keeps running through grid outages — automatically, with no manual switching. The EnergyPro family is designed to install between your meter and main panel, hard-wired for true whole-home coverage rather than just essentials.

Key Specs

• Continuous AC Output: 5,760W
• Battery Capacity: 7,680Wh (LiFePO4 — EnergyPack 500 modules at 4.8kWh each)
• Output Voltage: 120V/240V split-phase
• UPS Switchover: <20ms (EnergyPro family standard)
• Frequency: 60Hz
• Connectivity: USB / Wi-Fi / Bluetooth
• Protection Grade: NEMA 4X (weather-resistant outdoor install)
• Battery DoD: 95% (EnergyPack 500)
• Battery Chemistry: LiFePO4 with advanced BMS
• Self-Heating: Yes — operates reliably in cold climates
• Solar Compatibility: Works with new and existing solar systems (microinverters and string inverters), AC-coupled
• Black-Start Capability: Restarts solar even after prolonged outages
• Installation: Two-person install in under an hour — no special equipment required
• Warranty: 10 years (EnergyPro family standard)

What It Can Power

• Whole-home essentials for multi-day outages (fridge, freezer, lights, internet, HVAC)
• Mini-split AC and heat pump systems
• Heavy-duty appliances at 240V split-phase (well pumps, dryers, electric stoves)
• Daily solar self-consumption (charge during day, run home off battery in evening)
• Backup for critical home systems (sump pumps, medical equipment, security)

Three Microgrid Configurations

• EnergyPro 6K + AT1 Smart Panel — Full microgrid with intelligent load management and bi-directional EV charging support
• EnergyPro 6K + EMS (Whole-Home Backup) — Installs between meter and main panel, full-home coverage during outages
• EnergyPro 6K + EMS (Partial Backup) — Start with essentials, expand later as needs grow

Frequently Asked Questions

Does the EnergyPro 6K back up my whole home?
Yes. With the EMS it installs between your meter and main panel for true whole-home backup — or start with partial (essentials) backup and expand later. Its 120V/240V split-phase output covers heavy loads that portable backups can't.

Can it run 240V appliances like a well pump or dryer?
Yes — native 120V/240V split-phase output runs well pumps, electric dryers, electric stoves, and mini-split heat pumps.

Will it work with my existing solar?
Yes. It's AC-coupled and works with new or existing solar (microinverter or string), and its black-start capability restarts your solar even after a prolonged outage.

How much energy does it store, and can it expand?
7,680Wh of LiFePO4 storage using EnergyPack 500 modules (4.8kWh each), with 95% usable depth of discharge.

How fast does it switch over in an outage?
Under 20ms, automatically — no manual switching, so your critical circuits stay live.

Can it install outdoors or in a cold climate?
Yes — it's NEMA 4X weather-resistant and the LiFePO4 batteries are self-heating for reliable cold-weather operation.

Pairs Well With

• BLUETTI ePanel Smart Distribution Panel — intelligent AC + DC circuit control
• BLUETTI ePad System Monitoring — real-time energy monitoring dashboard
• BLUETTI Sora 220 Solar Panel — portable solar supplement

Not sure what size you need? Use our free Power Station Size Calculator to get a personalized recommendation in under 2 minutes — factors in real-world appliance duty cycles so you don't undersize.

Warranty & Support

10-year warranty on the EnergyPro 6K system (2-year on accessory items like the ePad). TrailVault is an authorized BLUETTI dealer — full warranty support, genuine products, and direct human contact at joel@trailvault.co.